CEC-accredited technician performing a solar system health check in Brisbane
Brisbane · CEC-accredited · Same-week bookings

Solar System Health Check & Inspection

32-point diagnostic inspection of your panels, inverter and switchboard. Thermal imaging, IV-curve testing and a clear written report — from $249 across Brisbane.

★ 4.9 / 276 Brisbane reviews · Insurance & warranty-ready reports · Independent — we don't sell panels you don't need

32-point
Inspection
AS/NZS 5033 aligned
60–90 min
On-site time
report within 48 hr
$249
From, fixed price
Brisbane metro
CEC
Accredited tech
licensed electrician

Signs your system needs a health check

If any of these apply, book an inspection now — the longer DC faults run, the higher the risk of inverter failure or rooftop fire.

Generation has dropped

Your app or bill shows 15%+ less production than last year — usually a failed panel, MPPT, or string isolation fault.

Inverter is throwing faults

Recurring 'isolation alarm', 'arc fault' or 'grid voltage' errors. Most Brisbane homeowners ignore these until the inverter dies.

System over 5 years old

DC isolators, MC4 connectors and rooftop cabling fail in the Queensland sun. Inspection at 5 and 8 years is industry best-practice.

Buying or selling a home

Independent solar inspection report adds confidence for buyers and protects sellers from post-settlement disputes.

Insurance or warranty claim

Insurers and manufacturers require an independent technical report before approving panel, inverter or storm-damage claims.

Never had one done

Most Brisbane systems have never been inspected since install. Hidden DC arc faults are the #1 cause of rooftop fires in Australia.

DC arc faults are the #1 cause of rooftop fires

Fire & Rescue NSW data shows over 800 solar-related house fires since 2018, almost all from DC isolator water ingress or aged MC4 connectors — both invisible from the ground and both checked in our inspection.

What our 32-point inspection covers

Every health check follows the same documented checklist, aligned with AS/NZS 5033 and Clean Energy Council guidelines.

Panels & array

  • Visual inspection of every panel (cracks, delamination, hotspots)
  • Thermal imaging scan with FLIR camera
  • Mounting frame, rails and roof penetration check
  • Bird, possum and debris ingress check

DC electrical

  • IV-curve trace on every string
  • DC isolator condition & water-ingress test
  • MC4 connector torque & UV degradation check
  • Insulation resistance (megger) test on all strings

Inverter & AC

  • Inverter firmware & error-log audit
  • AC isolator and switchboard check
  • RCD / safety switch operation test
  • Earthing & equipotential bonding verification

Compliance & performance

  • Compare actual vs design output (annualised)
  • Energex export limit & feed-in verification
  • Monitoring app setup & owner walk-through
  • Written report + photos + Form 16 if compliant

Fixed-price inspection packages

Transparent Brisbane pricing — no hourly rates, no "call-out plus per-panel" surprises.

Essential Health Check

$249
Single-phase, ≤6.6kW
  • 32-point visual & electrical inspection
  • Inverter error-log download & analysis
  • Insulation resistance test on all strings
  • Written PDF report within 48 hours
  • Quote for any remedial work (no obligation)
Most popular

Full Performance Audit

$389
Most popular · up to 13.2kW
  • Everything in Essential
  • FLIR thermal imaging of every panel
  • IV-curve trace on every string
  • Annualised output benchmark vs design
  • Monitoring app setup & owner training
  • Insurance / warranty-ready report

Large / Three-Phase

$549+
13.2kW+ or three-phase
  • Everything in Full Performance
  • Per-phase load & voltage analysis
  • Battery state-of-health test (if fitted)
  • Switchboard thermal scan
  • Form 16 electrical compliance certificate
  • 30-min phone debrief with owner

How a health check runs

Four simple steps from booking to written report.

1

Book online or by phone

Same-week bookings across Brisbane. Tell us your panel count, inverter brand and any symptoms — we'll confirm a fixed price upfront.

2

On-site inspection

60–90 minutes. Our CEC-accredited tech runs the full 32-point check — rooftop, switchboard and inverter — using calibrated test equipment.

3

Written report in 48 hr

PDF report with thermal images, IV-curve traces, every test reading and a clear traffic-light summary. Insurance and warranty ready.

4

Fix only what's needed

If we find issues, you get an itemised, no-pressure quote. You're free to use any installer — the report is yours.

Frequently asked questions

Brisbane homeowners' most common questions about solar inspections.

Know exactly what your solar system is doing

Independent, written report from a CEC-accredited tech. Same-week bookings across Brisbane and SE Queensland.